Command Reference Guide

SROS Command Line Interface Reference Guide Serial Interface Configuration Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 500
serial-mode <mode>
Use the serial-mode command to specify the electrical mode for the interface. Use the no form of this
command to return to the default value.
Syntax Description
<mode> Specifies the electrical specifications for the interface
V35 Configures the interface for use with the V.35 adapter cable (P/N 1200873L1)
X21 Configures the interface for use with the X.21 adapter cable (P/N 1200874L1)
Default Values
<mode> V35
Command Modes
(config-ser 1/1)# Serial Interface Configuration Mode required
Functional Notes
The pinouts for each of the available interfaces may be found in the Hardware Configuration Guide located
on the ProCurve SROS Documentation CD (provided in your shipment).
Usage Examples
The following example configures the serial interface to work with the X.21 adapter cable:
(config)#interface serial 1/1
(config-ser 1/1)#serial-mode X21