Command Reference Guide

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 471
lldp receive
Use the lldp receive command to allow LLDP packets to be received on this interface.
Syntax Description
No subcommands.
Default Values
By default, all interfaces are configured to send and receive LLDP packets.
Command Modes
(config-interface)# Ethernet Command Mode
Usage Examples
The following example configures Ethernet interface 0/1 to receive LLDP packets:
(config-eth 0/1)#lldp receive