Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 46
clear spanning-tree counters [interface <interface>]
The clear spanning-tree counters command clears the following counts: BPDU transmit, BPDU receive,
and number of transitions to forwarding state.
Syntax Description
interface <interface> Optional. Specifies a single interface. Enter clear spanning-tree counters ? for a
complete list of interfaces.
Default Values
No default value necessary for this command.
Command Modes
# Enable mode
Usage Examples
The following example clears the spanning tree counters for Ethernet 0/1:
>enable
#clear spanning-tree counters interface eth 0/1