Command Reference Guide

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 452
hexadecimal bytes. (For units with a single Ethernet interface, the MAC
ADDRESS assigned to Ethernet 0/1 is used in this field).
INTERFACE SPECIFIC INFO is only used for Frame Relay interfaces and can be
determined using the following:
FR_PORT# : Q.922 ADDRESS
Where the FR_PORT# specifies the label assigned to the virtual Frame Relay
interface using four hexadecimal bytes. For example, a virtual Frame Relay
interface labeled 1 would have a FR_PORT# of 00:00:00:01.
The Q.922 ADDRESS field is populated using the following:
Where the FECN, BECN, C/R, DE, and high order EA bits are assumed
to be 0 and the lower order extended address (EA) bit is set to 1.
The following list provides a few example DLCIs and associated Q.922 address:
DLCI (decimal) / Q.922 address (hex):
16 / 0x0401
50 / 0x0C21
60 / 0x0CC1
70 / 0x1061
80 / 0x1401
host-name
“<string>”
By default, the hostname is the name configured using the Global Configuration
hostname command.
DLCI (high order)
DLCI (lower)
EA
EA
DE
C/R
FECN BECN
876 5 4 3 2 1