Command Reference Guide

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 439
arp arpa
Use the arp arpa command to enable address resolution protocol on the Ethernet interface.
Syntax Description
arpa Keyword used to set standard address resolution protocol for this interface.
Default Values
The default for this command is arpa.
Command Modes
Ethernet Interface Configuration Modes
Usage Examples
The following example enables standard ARP for the Ethernet interface:
(config)#interface eth 0/1
(config-eth 0/1)#arp arpa