Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 7000 dl Router Series
431432433434435436437438439440
SROS Command Line Interface Reference Guide Certificate Configuration Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 432
crl
Use the crl command to restore a CRL. Use the no form of this command to remove the CRL for the
specific CA.
Syntax Description
No subcommands.
Default Values
No defaults necessary for this command.
Command Modes
(config-cert-chain)# Certificate Configuration
Functional Notes
The user typically does not enter this command. It is primarily used to restore CRLs from startup-config
when the product is powered up.
Usage Examples
The following example removes the CRL for the current CA:
(config-cert-chain)#no crl