Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 43
clear pppoe <interface id>
Use the clear pppoe command to terminate the current PPPoE client session and cause the Secure Router
OS to try and re-establish the session.
Syntax Description
<interface id> PPP interface number.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following example ends the current PPPoE client session for ppp 1:
>enable
#clear pppoe 1