Command Reference Guide

SROS Command Line Interface Reference Guide CA Profile Configuration Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 428
subject-name <name>
Use the subject-name command to specify the subject name used in the certificate request.
Syntax Description
<name> Enter a subject name string (up to 256 characters entered in X.500 LDAP format).
Default Values
By default, there is no subject name configured.
Command Modes
(ca-profile)# CA Profile Configuration
Functional Notes
Configuring this setting simplifies the crypto ca enroll dialog, allowing you to enter the subject name only
once rather than every time you go through the enrollment process. See
crypto ca enroll <name> on page
217
.
Usage Examples
The following example assigns a subject name of cert to certificate requests:
(ca-profile)#subject-name cert