Command Reference Guide

SROS Command Line Interface Reference Guide CA Profile Configuration Command Set

fqdn <fqdn>

Use the fqdn command to specify a fully-qualified domain name (FQDN) to be included in the certificate

requests.

Syntax Description

<fqdn> Specifies the FQDN (e.g., company.com) to be included in requests.

Default Values

No defaults necessary for this command.

Command Modes

(ca-profile)# CA Profile Configuration

Functional Notes

Configuring this setting simplifies the crypto ca enroll dialog, allowing you to enter the FQDN only once

rather than every time you go through the enrollment process. See

crypto ca enroll <name> on page 217.

Usage Examples

The following example specifies company.com as the FQDN to be sent in certificate requests:

(ca-profile)#fqdn company.com