Command Reference Guide

SROS Command Line Interface Reference Guide CA Profile Configuration Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 422
enrollment terminal
Use the enrollment terminal command to specify manual (i.e., cut-and-paste) certificate enrollment.
Syntax Description
No subcommands.
Default Values
By default, this command is enabled.
Command Modes
(ca-profile)# CA Profile Configuration
Functional Notes
This mode is overridden if the enrollment url command specifies the CA to which automatic certificate
requests are to be sent via SCEP (simple certificate exchange protocol). Issuing an enrollment terminal
command after using the enrollment url command deletes the URL and forces the unit to use manual
enrollment. See
enrollment url <url> on page 423 for more information.
Usage Examples
The following example configures the Secure Router OS to accept manual certificate enrollment input:
(ca-profile)#enrollment terminal