Command Reference Guide

SROS Command Line Interface Reference Guide CA Profile Configuration Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 420
email address <email address>
Use the email address command to specify that an email address should be included in the certificate
request.
Syntax Description
<email address> Specifies the complete email address to use when sending certificate requests.
This field allows up to 51 characters.
Default Values
No defaults necessary for this command.
Command Modes
(ca-profile)# CA Profile Configuration
Functional Notes
Configuring this setting simplifies the crypto ca enroll dialog, allowing you to enter the email address only
once rather than every time you go through the enrollment process. See
crypto ca enroll <name> on page
217
.
Usage Examples
The following example specifies [e-mail] as the email address to be sent in certificate
requests:
(ca-profile)#email address [e-mail]