Command Reference Guide

SROS Command Line Interface Reference Guide CA Profile Configuration Command Set

CA PROFILE CONFIGURATION COMMAND SET

To activate the Certificate Authority (CA) Profile Configuration , enter the crypto ca profile command at

the Global Configuration Mode prompt. For example:

Router>

enable

Router#

configure terminal

Router(config)#

crypto ca profile MyProfile

Configuring New CA Profile MyProfile

Router(ca-profile)#

The following commands are common to multiple command sets and are covered in a centralized section

of this guide. For more information, refer to the sections listed below:

bind <#> <from interface> <slot/port> <tdm-group#> <to interface> <slot/port> on page 924

do on page 928

end on page 929

exit on page 930

ping <address> on page 931

show running-config on page 933

All other commands for this command set are described in this section in alphabetical order.

crl optional on page 419

email address <email address> on page 420

enrollment retry [count | period] on page 421

enrollment terminal on page 422

enrollment url <url> on page 423

fqdn <fqdn> on page 424

ip-address <address> on page 425

password <password> on page 426

serial-number on page 427

subject-name <name> on page 428