Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 41
clear lldp counters interface <interface>
Use the clear lldp counters interface command to reset all LLDP packet counters to 0 for a specified
interface.
Syntax Description
<interface> Clears the information for the specified interface. Type clear lldp counters
interface ? for a complete list of applicable interfaces.
Default Values
No default values are necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following example resets the counters on a PPP interface:
>enable
#clear lldp counters interface ppp 1