Command Reference Guide

SROS Command Line Interface Reference Guide Crypto Map Manual Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 406
antireplay
Use the antireplay command to enable antireplay sequence number checking for all security associations
created on this crypto map. Use the no form of this command to disable.
Syntax Description
No subcommands.
Default Values
By default, this command is enabled.
Command Modes
(config-crypto-map)# Crypto Map Configuration Mode (IKE or Manual)
Usage Examples
The following example enables antireplay sequence checking on crypto map VPN 100:
(config)#crypto map VPN 100 ipsec-manual
(config-crypto-map)#antireplay