Command Reference Guide

SROS Command Line Interface Reference Guide IKE Client Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 395
netbios-name-server <address1> <address2>
Use the netbios-name-server command to specify the NetBIOS Windows Internet Naming Service
(WINS) name servers to assign to a client.
Syntax Description
<address1> The first WINs server address to assign.
<address2> The second WINs server address to assign.
Default Values
By default, no WINs server address is defined.
Command Modes
(config-ike-client-pool)# IKE Client Configuration Mode
Usage Examples
The following example defines two WINs server addresses for this configuration pool:
(config-ike-client-pool)#netbios-name-server 172.1.17.1 172.1.17.25