Command Reference Guide

SROS Command Line Interface Reference Guide IKE Client Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 393
dns-server <address1> <address2>
Use the dns-server command to specify the DNS server address(es) to assign to a client.
Syntax Description
<address1> The first DNS server address to assign.
<address2> Optional. The second DNS server address to assign.
Default Values
By default, no DNS server address is defined.
Command Modes
(config-ike-client-pool)# IKE Client Configuration Mode
Usage Examples
The following example defines two DNS server addresses for this configuration pool:
(config-ike-client-pool)#dns-server 172.1.17.1 172.1.17.3