Command Reference Guide

SROS Command Line Interface Reference Guide IKE Policy Attributes Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 391
lifetime <seconds>
Use the lifetime command to specify how long an IKE SA is valid before expiring.
Syntax Description
<seconds> Specify how many seconds an IKE SA will last before expiring.
Default Values
By default, lifetime is set to 28,800 seconds.
Command Modes
(config-ike-attribute)# IKE Policy Attribute Configuration Mode
Usage Examples
The following example sets a lifetime of two hours:
(config-ike-attribute)#lifetime
7200