Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 38
clear ip prefix-list <listname>
Use the clear ip prefix-list command to clear the IP prefix list hit count shown in the show ip prefix-list
detail output.
Syntax Description
<listname> Specifies of the IP prefix list to clear.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following example clears the hit count statistics for prefix list test:
>enable
#clear ip prefix-list test