Command Reference Guide

SROS Command Line Interface Reference Guide IKE Policy Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 378
client configuration pool <poolname>
Use the client configuration pool command to configure the Secure Router OS to perform as mode-config
server (edge device) when an IKE policy is negotiated.
Variations of this command include the following:
client configuration pool <poolname>
client configuration pool <poolname> initiate
client configuration pool <poolname> initiate respond
client configuration pool <poolname> respond
client configuration pool <poolname> respond initiate
Syntax Description
<poolname> The pool from which to obtain parameters to assign to the client.
Default Values
By default, if this command is not present in the IKE policy, the device allocates mode-config IP addresses, DNS
server addresses, and NetBIOS name server addresses, and mode-config is not performed.
Command Modes
(config-ike)# IKE Policy Configuration Mode
Functional Notes
This command ties an existing client configuration pool to an IKE policy.
Usage Examples
The following example ties the ConfigPool1 configuration pool to this IKE policy:
(config-ike)#
client configuration pool ConfigPool