Command Reference Guide

SROS Command Line Interface Reference Guide DHCP Pool Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 372
timezone-offset <offset>
Use the timezone-offset command to specify the timezone adjustment (in hours) published to the client.
Syntax Description
<offset> Specifies the timezone adjustment (in hours) published to the client. Use an
integer from -12 to 12.
Default Values
No default value necessary for this command.
Command Modes
(config-dhcp)# DHCP Pool
Usage Examples
The following example sets the timezone adjustment for the client to -3 hours. For example, if the server
time is configured for eastern time and the client is configured for Pacific time, you can set the client
timezone adjustment to -3 hours:
(config)#ip dhcp-server pool MyPool
(config-dhcp)#timezone-offset -3