Command Reference Guide

SROS Command Line Interface Reference Guide DHCP Pool Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 365
lease <days> <hours> <minutes>
Use the lease command to specify the duration of the lease for an IP address assigned to a Dynamic Host
Configuration Protocol (DHCP) client. Use the no form of this command to return to the default lease
value.
Syntax Description
<days> Specifies the duration of the IP address lease in days.
<hours> Optional. Specifies the number of hours in a lease. You may only enter a value in
the hours field if the days field is specified.
<minutes> Optional. Specifies the number of minutes in a lease. You may only enter a value
in the minutes field if the days and hours fields are specified.
Default Values
By default, an IP address lease is one day.
Command Modes
(config-dhcp)# DHCP Pool
Usage Examples
The following example specifies a lease of 2 days:
(config)#ip dhcp-server pool MyPool
(config-dhcp)#lease 2
The following example specifies a lease of 1 hour:
(config)#ip dhcp-server pool MyPool
(config-dhcp)#lease 0 1
The following example specifies a lease of 30 minutes:
(config)#ip dhcp-server pool MyPool
(config-dhcp)#lease 0 0 30