Command Reference Guide

SROS Command Line Interface Reference Guide DHCP Pool Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 361
domain-name <domain>
Use the domain-name command to specify the domain name for the Dynamic Host Configuration
Protocol (DHCP) client. Use the no form of this command to remove the configured domain name.
Syntax Description
<name> Alphanumeric string (up to 32 characters in length) used to identify the DHCP
client.
Default Values
By default, there are no specified domain-names.
Command Modes
(config-dhcp)# DHCP Pool
Usage Examples
The following example specifies a domain name of procurve.com:
(config)#ip dhcp-server pool MyPool
(config-dhcp)#domain-name procurve.com