Command Reference Guide

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 349
spanning-tree hello-time <seconds>
Use the spanning-tree hello-time command to specify the delay interval (in seconds) between hello
bridge protocol data units (BPDUs). To return to the default interval, use the no form of this command.
Syntax Description
<seconds> Delay interval (in seconds) between hello BPDUs. Range: 0 to 1000000.’
Default Values
<seconds> 2 seconds
Command Modes
(config)# Global Configuration Mode required
Usage Examples
The following example configures a spanning-tree hello-time interval of 10000 seconds:
(config)#spanning-tree hello-time 10000