Command Reference Guide

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 348
spanning-tree forward-time <seconds>
Use the spanning-tree forward-time command to specify the delay interval (in seconds) when forwarding
spanning-tree packets. Use the no form of this command to return to the default interval.
Syntax Description
<seconds> Forward delay interval in seconds (Range: 4 to 30).
Default Values
<seconds> 15 seconds
Command Modes
(config)# Global Configuration Mode required
Usage Examples
The following example sets the forwarding time to 15 seconds:
(config)#spanning-tree forward-time 15