Command Reference Guide

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 340
snmp-server location <string>
Use the snmp-server location command to specify the Simple Network Management Protocol (SNMP)
system location string. Use the no form of this command to return to the default value.
Syntax Description
“<string>” Alphanumeric string encased in quotation marks (up to 32 characters in length)
used to populate the system location string.
Default Values
<string> ProCurve
Command Modes
(config)# Global Configuration Mode required
Usage Examples
The following example specifies a location of 5th Floor Network Room:
(config)#snmp-server location “5th Floor Network Room”