Command Reference Guide

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 334
snmp-server chassis-id <id string>
Use the snmp-server chassis-id command to specify an identifier for the Simple Network Management
Protocol (SNMP) server. Use the no form of this command to return to the default value.
Syntax Description
<id string> Alphanumeric string (up to 32 characters in length) used to identify the product.
Default Values
<id string> Chassis ID
Command Modes
(config)# Global Configuration Mode required
Usage Examples
The following example configures a chassis ID of A432692:
(config)#snmp-server chassis-id A432692