Command Reference Guide

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 311
Usage Examples
The following example sets the LLDP minimum-transmit-interval to 10 seconds:
(config)#lldp minimum-transmit-interval 10
The following example sets the LLDP reinitialization-delay to 5 seconds:
(config)#lldp reinitialization-delay 5
The following example sets the LLDP transmit-interval to 15 seconds:
(config)#lldp transmit-interval 15
The following example sets the LLDP ttl-multiplier to 2 and the time-to-live for all LLDP frames transmitted
from this unit to 30 seconds;
(config)#lldp transmit-interval 15
(config)#lldp ttl-multiplier 2