Command Reference Guide

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 284
Functional Notes (Continued)
Use this command to configure the Secure Router OS to forward UDP packets across the WAN link to
allow remote devices to connect to a UDP service on the other side of the WAN link.
Usage Examples
The following example forwards all Domain Name Server broadcast traffic to the DNS server with IP
address 192.33.5.99:
(config)#ip forward-protocol udp domain
(config)#interface eth 0/1
(config-eth 0/1)#ip helper-address 192.33.5.99