Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 28
clear crypto ike sa <policy priority>
Use the clear crypto ike sa command to clear existing IKE security associations (SAs), including active
ones.
Syntax Description
<policy priority> Optional. Clear out all existing IKE SAs associated with the designated policy priority.
This number is assigned using the
crypto ike policy command.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following example clears the entire database of IKE SAs (including the active associations):
>enable
#clear crypto ike sa