Command Reference Guide

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 279
ip firewall attack-log threshold <value>
Use the ip firewall attack-log threshold command to specify the number of attack mounting attempts the
Secure Router OS will identify before generating a log message. Use the no form of this command to
return to the default threshold.
Syntax Description
<value> Specifies the number of attack mounting attempts the Secure Router OS will
identify before generating a log message (valid range: 0 to 4294967295).
Default Values
<value> 100
Command Modes
(config)# Global Configuration Mode
Usage Examples
The following example specifies a threshold of 25 attacks before generating a log message:
(config)#ip firewall attack-log threshold 25
Note
The Secure Router OS security features must be enabled (using the ip firewall command)
for the stateful inspection firewall to be activated.