Command Reference Guide

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 253
Default Values
By default, all Secure Router OS security features are disabled and there are no configured access lists.
Command Modes
(config)# Global Configuration Mode
<destination port> Optional.
Only valid when <protocol> is tcp or udp (See previously listed
<source port> for more details)
<icmp-type> Optional. Filter packets using ICMP defined (and numbered) messages carried
in IP datagrams (used to send error and control information). Valid range is 0 to
255.
<icmp-code> Optional. ICMP packets that are filtered using the ICMP message type (using the
<icmp-type> keyword) may also be filtered using the ICMP message code (valid
range: 0 to 255).
An <icmp-type> must be specified when entering an <icmp-code>.
<icmp-message> Optional. Filter packets using ICMP descriptive message rather than the
corresponding type and code associations.
Syntax Description (Continued)