Command Reference Guide

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

crypto ike remote-id

Use the crypto ike remote-id command to specify the remote ID and to associate a pre-shared key with

the remote ID.

Syntax Description

address

Specifies a remote ID of IPv4 type.

any Wildcard that allows any remote ID (type and value).

asn1-dn

<name>

Specifies an Abstract Syntax Notation Distinguished Name as the

remote ID (enter this value in LDAP format).

fqdn

<fqdn>

Specifies a fully qualified domain name as the remote ID.

user-fqdn

<fqdn>

Specifies a user fully qualified domain name or email address as

the remote ID.

preshared-key

Associates a pre-shared key with this remote ID.

no-mode-config Optional keyword used to specify that the peer matching this

remote ID should not use mode config.

no-xauth Optional keyword used to specify that the peer matching this

remote ID should not use xauth.

nat-t [v1 l v2] [allow l force I disable] Optional keyword that denotes whether peers matching this

remote ID should allow, disable, or force NAT traversal versions 1

and 2.

Default Values

There are no default settings for this command.

Command Modes

(config)# Global Configuration Mode

Note

For VPN configuration example scripts, refer to the technical support note VPN

Configuration Guide located on the ProCurve SROS Documentation CD provided with

your unit.