Command Reference Guide

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 216
crypto ca certificate chain <name>
Use the crypto ca certificate chain command to enter the Certificate Configuration for the specified CA.
See Certificate Configuration Command Set on page 429 for more information.
Syntax Description
<name> Alphanumeric string (up to 32 characters) used to specify a CA profile.
Default Values
No defaults necessary for this command.
Command Modes
(config)# Global Configuration Mode
Functional Notes
Typically used only in the running-config and startup-config to restore certificates.
Usage Examples
The following example enters the Certificate Configuration for the CA profile MyProfile:
(config)#crypto ca certificate chain MyProfile
(config-cert-chain)#