Command Reference Guide

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 211
bridge <group#> protocol ieee
The bridge protocol ieee command configures a bridge group for the IEEE Spanning Tree Protocol. Use
the no form of this command (with the appropriate arguments) to delete this setting.
Syntax Description
<group#> Bridge group number (1 to 255) specified using the bridge command
ieee IEEE 802.1 Ethernet spanning-tree protocol
Default Values
By default, all configured bridge interfaces implement ieee spanning-tree protocol.
Command Modes
(config)# Global Configuration Mode
Usage Examples
The following example deletes the bridge protocol setting for bridge-group 17:
(config)#no bridge 17 protocol ieee