Command Reference Guide

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 205
aaa group server radius <listname>
Use the aaa group server radius command to group pre-defined RADIUS servers into named lists. For
more detailed information on AAA functionality, refer to the Technology Review section of the command
aaa on on page 206.
Syntax Description
<listname > Enter the name of the list.
Default Values
No default value necessary for this command.
Command Modes
(config)# Global Configuration Mode
Functional Notes
Use the radius-server command to specify RADIUS servers before adding them to a group. This
command enters a for adding individual servers to the named group. See
Radius Group Command Set on
page 416 for more information.
The default group cannot be changed and includes all RADIUS servers in the order they were specified by
the radius-server commands.
Usage Examples
The following example creates the named list myServers and enters the Radius Group:
(config)#aaa group server radius myServers
(config-sg-radius)#