Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 198
wall <message>
Use the wall command to send messages to all users currently logged in to the Secure Router OS unit.
Syntax Description
No subcommands.
Default Values
No defaults necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following example sends the message “Reboot in 5 minutes if no objections” to the CLI screen of
everyone currently connected:
>enable
#wall Reboot in 5 minutes if no objections