Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 7000 dl Router Series
191192193194195196197198199200
SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 195
terminal length <text>
The terminal length command sets the number of rows (lines) for a terminal session. Use the no form of
this command to disable this feature. This command is only valid for the current session and returns to the
default (24 rows) when the session closes.
Syntax Description
No subcommands.
Default Values
The default setting for this command is 24 rows.
Command Modes
# Enable Mode
Usage Examples
The following example sets the number of rows to 30.
>enable
#terminal length 30