Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 193
show version
Use the show version command to display the current Secure Router OS version information.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Command Modes
> or # Basic or Enable Command Mode
Usage Examples
The following is a sample show version output:
>enable
#show version
ProCurve Secure Router 7203dl
SROS Version: 08.01.04.HP.E
Checksum: 4F8DCF96, built on: Tue Dec 21 08:32:18 2004
Boot ROM version 08.01.04.HP
Checksum: B133, built on: Tue Dec 21 08:32:25 2004
Copyright (c) 2004-2005, Hewlett-Packard, Co.
Platform: ProCurve Secure Router 7203dl
Serial number UNKNOWN
Flash: 33554432 bytes DRAM: 268435455 bytes
System uptime is 0 days, 0 hours, 22 minutes, 42 seconds
Current system image file is "HP7203A-08-01-04-HP-E.biz"
Primary boot system image file is "HP7203A-08-01-04-HP-E.biz"
Backup boot system image file is "NONVOL:/J01_01_03.biz"
Primary system configuration file is "startup-config"
Backup system configuration file is "CFLASH:/startup-config"