Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 191
show tcp info <control block>
Use the show tcp info command to display TCP control block information in the Secure Router OS. This
information is for troubleshooting and debug purposes only. For more detailed information, you can
optionally specify a particular TCP control block. When a particular TCP control block is specified, the
system provides additional information regarding crypto map settings that the show tcp info command
does not display.
Syntax Description
<control block> Optional. Specify a particular TCP control block for more detailed information. The
valid range is
from 0 to 31.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following is a sample from the show tcp info command:
>enable
# show tcp info
TCP TCB Entries
ID
0
1
2
3
4
5
STATE
FREE
LISTEN
LISTEN
LISTEN
LISTEN
FREE
LSTAT
E
FREE
FREE
FREE
FREE
FREE
FREE
OSTAT
E
FREE
FREE
FREE
FREE
FREE
FREE
TYPE
SRVR
CONN
CONN
CONN
CONN
SRVR
FLAGS
0
0
0
0
0
0
RPORT
0
0
0
0
0
0
LPORT
0
21
80
23
5761
0
SWIN
0
0
0
0
0
0
SRT
0
0
0
0
0
0
INTERFAC
E
NONE
NONE
NONE
NONE
NONE
NONE
.
.
31 FREE FREE FREE SRVR 0 0 0 0 0 NONE