Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 178
show processes cpu
Use the show processes cpu command to display information regarding any processes that are currently
active.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following is a sample output from the show processes cpu command:
>enable
#show processes cpu
processes cpu
System load: 7.07% Min: 0.00% Max 85.89%
Context switch load: 0.21%
Task Task Invoked Exec Time Runtime Load %
Id Name PRI STAT (count) (usec) (usec) (1sec)
0 Idle 0 W 129689 1971 927923 92.79
1 FrontPanel 249 W 9658 165 3202 0.32
3 Stack Usage 11 W 485 305 325 0.03
4 Q Test 1 10 W 50 4 0 0.00
5 Q Test 2 11 W 50 6 0 0.00
10 Clock 20 W 1443 24 55 0.01
11 PacketRouting 250 W 31656 10 3871 0.39
12 Thread Pool 50 W 161 159 0 0.00
13 IKE 10 W 2 341 0 0.00
14 RouteTableTick 50 W 49 874 874 0.09
....etc.