Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set

show port-auth supplicant [interface <interface id> | summary]

Use the show port-auth command to display supplicant information pertaining to port authentication. The

supplicant is the port that will receive services from the port authenticator.

Syntax Description

interface <interface id> Optional. Shows port authorization supplicant information related to a specific

interface. Type show port-auth supplicant interface ? for a complete list of

applicable interfaces.

summary Optional. Shows only basic information about each applicable interface.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following example displays supplicant information for Ethernet interface 0/2:

>enable

#show port-auth supplicant interface eth 0/2

Interface: eth 0/2

Local Supplicant mode is enabled

Username: User1

Password: securePass

Authorization Status: yes

Supp State Machine: CONNECTED