Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 173
show memory [heap]
Use the show memory heap command to display statistics regarding memory including memory
allocation and buffer use statistics. Shows how memory is in use (broken down by memory size) and how
much memory is free.
Syntax Description
heap Shows how much memory is in use (broken down by memory block size) and how
much memory is free.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following is a sample output from the show memory heap command:
>enable
# show memory heap
Memory Heap:
HeapFree: 2935792
HeapSize: 8522736
Block Managers:
Mgr Size Used Free Max-Used
00580 58
1 16 1263 10 1273
2 48 1225 2 1227
3 112 432 2 434
4 240 140 3 143
5 496 72 2 74
6 1008 76 1 26
7 2032 25 1 26
8 4080 2 1 3
9 8176 31 1 32
10 16368 8 0 8
11 32752 5 1 6