Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set

show lldp neighbors interface <interface> detail

Use the show lldp neighbors interface command to display information about neighbors of this device

learned about via LLDP.

Syntax Description

<interface> Displays the information for the specified interface. Type show lldp neighbors

interface ? for a complete list of applicable interfaces.

detail Shows detailed information about all neighbors to this device.

<type> Displays a summary of all neighbors learned about through interfaces of the

specified type.

<interface-ID> Shows a summary of all neighbors learned about through the specified interface.

<type> detail Shows detailed information about all neighbors learned about through interfaces

of the specified type.

<interface-ID> detail Shows detailed information about all neighbors learned about through the

specified interface.

<type> <interface-ID> Shows detailed information about all neighbors learned about through the

detail specified interface.

Default Values

No default values necessary for this command.

Command Modes

# Enable Command Mode