Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 169
show lldp interface <interface>
Use the show lldp interface command to display LLDP configuration and statistics for interfaces on this
device.
Syntax Description
<interface> Displays the information for the specified interface. Type show lldp interface ?
for a complete list of applicable interfaces.
Default Values
No default values are necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following example shows LLDP configuration and statistics for the Ethernet 0/1 interface:
#show lldp interface ethernet 0/1
eth 0/1 (TX/RX)
0 packets input
0 input errors
0 TLV errors, 0 TLVs Discarded
0 packets discarded
8799 packets output
0 neighbor ageouts
#