Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 167
show lldp
Use the show lldp command to display LLDP timer configuration.
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following example shows a sample LLDP timer configuration:
#show lldp
Global LLDP information:
Sending LLDP packets every 30 seconds
Sending TTL of 120 seconds