Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 159
show ip policy-class <policyname>
Use the show ip policy-class command to display a list of currently configured access policies. See ip
policy-class <policyname> max-sessions <number> on page 293 for information on configuring access
policies.
Syntax Description
<policyname> Optional. Enter a specific policy class name to display information for a single policy.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following is a sample output from the show ip policy-class command:
>enable
#show ip policy-class
ip policy-class max-sessions 0
Policy-class "Trusted":
0 current sessions (6000 max)
Entry 1 - allow list MatchAll