Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 157
show ip ospf neighbor <interface type> <interface number> <neighbor id>
[detail]
Use the show ip ospf neighbor command to display OSPF neighbor information for a specific interface.
Syntax Description
<interface type> Optional. Enter the interface type (i.e., eth, ppp, etc.).
<interface number> Optional. Enter the interface number.
<neighbor id> Optional. Enter a specific neighbor’s router ID.
detail Optional. Enter this keyword to display details on all neighbors.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
>enable
#show ip ospf neighbor