Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 156
show ip ospf interface <interface type> <interface number>
Use the show ip ospf interface command to display OSPF information for a specific interface.
Syntax Description
<interface type> Optional. Enter the interface type. Type show ip ospf interface ? for a complete list
of applicable interfaces.
<interface number> Optional. Enter the interface number.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
>enable
#show ip ospf interface ppp 1