Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 148
show ip dhcp-server binding <client ip address>
Use the show ip dhcp-server binding command to display the Dynamic Host Client Protocol (DHCP)
server client table with associated information.
Syntax Description
<client ip address> Optional. Specify a particular client IP address.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following is a sample output from the show ip dhcp-server binding command:
>enable
#show ip dhcp-server binding
IP Address Client Id Lease Expiration Client Name
10.100.23.64 01:00:a0:c8:00:8f:b3 Aug 15 2002 11:02 AM Router