Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set

show ip bgp <network ip> [</length> | <network-mask>]

Use the show ip bgp <network ip> command to display details about the specified route, including the

advertising router IP address, router ID, and the list of neighbors to which this route is being advertised.

Syntax Description

<network ip> Shows only routes for the specified network.

</length> Optional. Shows only routes for the specified network matching the prefix length

(e.g., /24).

<network-mask> Optional. Shows only routes for the specified network matching the network mask

(e.g. 255.255.255.0).

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following example shows detailed output of this command:

#show ip bgp 10.15.240.0/28

BGP routing table entry for 10.15.240.0/28

Paths: (1 available, best #1)

Advertised to peers:

1.1.5.10

100 1

10.15.43.17 from 10.15.43.17 (8.1.1.1)

Origin IGP, metric 2, valid, external, best